New in R2.6: DNS

It is now possible to configure a Master repeater with a local static IPv4 address, or a static DNS
address, that is mapped to a dynamically assigned IPv4 address. The other IP Site Connect
devices will utilize this DNS address, to establish their link with the wide area system.
Codeplug settings (click to enlarge).
This feature is only available on the SLR series repeaters.

There are some new fields in the repeater codeplug: In the repeaters, you would need to provide the DNS server name. The Master would also use DHCP in this case. DNS would be enabled in all repeaters and the Master repeater IP address would be obtained by the Peers from the DHCP server. - rather than having this set in all of them.
Powered by Blogger.