How to check if NAT is working?
Tuesday, February 02, 2021
A common hiccup on new (or expanding) Multisite Capacity Plus systems, is that the repeaters are not able to connect between sites. More oft...
Showing posts with label IPv4. Show all posts
Showing posts with label IPv4. Show all posts
What are bursts and frames in MOTOTRBO?
Tuesday, May 22, 2018
A DMR TDMA burst consists of two 108-bit payload fields, with 48 signaling or synchronization bits in the middle. The duration of eac...
Converting a Radio/Group ID to an IP address
Tuesday, May 08, 2018
Background In a DMR system, each radio must have a unique Radio ID. This is a number between 1 and 16776415 (or 65535 for Capacity Plus...
MOTOTRBO and IP
Thursday, October 25, 2012
This post, as well as other posts on the above topic, have been converted into a document. This link will take you there .
Subscribe to:
Posts
(
Atom
)
Popular Posts
-
The intention behind any battery backup system is to keep the equipment powered for short periods of time until the AC mains is restored. No... -
This radio is fake! Every so often I get asked about a Motorola MT-777 portable two-way radio. I've done my own research and I can a... -
The Voice Announcement feature in the second generation MOTOTRBO radios allows the user to hear pre-recorded voice announcements whenever t... -
In my experience, the most common mistake technicians make when programming MOTOTRBO radios is not setting the Transmit Admit Criteria corre... -
Pulling pin 17 to ground will activate PTT function, activating the auxillary microphone input. Receive Audio is a fixed level (in...
Quick Links
Blog Archive
Get posts by email
Stuff to take note of.
About me
My name is Wayne Holmes (Ham Callsign DJ0WH). To discover a bit about me and what I do, click here.
Translate
Powered by Blogger.