DJ0WH: Linked Capacity Plus

Showing posts with label Linked Capacity Plus. Show all posts

Some things to think about if you have a MSCP system with an unequal number of repeaters at each site

Tuesday, November 02, 2021

A Multisite Capacity Plus system with an unequal number of channels on each site is a valid configuration. This would be the choice when the...

If you've ever installed a Multisite Capacity Plus system, which Router did you use?

Tuesday, December 08, 2020

I am planning a technical workshop that will cover the design and setup of a Multisite Capacity Plus system. Since with this topology, a Ro...

I want to build a Multisite Capacity Plus system, which router and/or switch should I choose?

Tuesday, November 10, 2020

The short answer is any professional-grade hardware you can get your hands on. The longer answer is as long as the router is able to support...

The difference between Radio Kill and Radio Disable

Tuesday, July 28, 2020

Radio Kill is a Capacity Max only feature. A killed Capacity Max radio will stop functioning altogether and must be sent to a Motorola repa...

Many readers will get this wrong!

Tuesday, May 19, 2020

Imagine this, if you will. A UHF trunked radio site is located on a hilltop site. The transmitter power is set to 25W and receiver sensitivi...

Trunked system misbehaving? Here's one reason why, maybe.

Tuesday, July 30, 2019

A Capacity Max (DMR Tier 3) system uses a control channel to process calls and other traffic on a site. The control channel also has anot...

Why and when a duplexer wont be sufficient?

Tuesday, July 09, 2019

The purpose of a regular (notch) compact duplexer, is to prevent the transmitted signal (RF energy) from entering the receiver and any re...

What is R56?

Tuesday, July 02, 2019

R56 is a widely accepted industry standard; that details the requirements and guidelines for the installation of communications infrastru...

Updated Multisite Capacity Plus cheatsheet

Tuesday, May 21, 2019

I've just updated my Multisite Capacity Plus cheatsheet. The updated post and link are here: https://cwh050.blogspot.com/2013/08/lin...

A few tips for choosing system frequencies

Monday, August 07, 2017

I recently had this question at work. The customer wanted to know what the rules are for selecting frequencies - in this case, on a Capac...

7 must-have tools for MOTOTRBO technicians

Tuesday, March 28, 2017

Other than the CPS and RM, here are some other tools I have installed on my PC that help with what I do: NetSetMan . I find that I have ...

WAVE5000 support in MOTOTRBO

Wednesday, January 25, 2017

As of R2.7.0, it is possible to connect a WAVE5000 server directly to a Capacity Max system via IP. Previously, this was only possible in ...

Do I have to use the Motorola reccomended Routers for MOTOTRBO?

Thursday, December 15, 2016

The short answer is no. The longer answer is that Motorola has validated a few Routers for use with MOTOTRBO systems and you can use wha...

Capacity Max is not for everyone, here's why

Monday, September 05, 2016

I can think of a few people reading this who are having a "OMG-what-is-Wayne-doing-now" moment. Eyes roll but seriously, Capacit...

Designing your MOTOTRBO system: Some Ideas

Wednesday, September 30, 2015

Now that you've convinced your customer that MOTOTRBO is the best choice for their communication needs, the next step is to design a s...

The (other) RSSI Threshold

Friday, August 15, 2014

To facilitate the use of a shared physical channel, a repeater in an IP Site Connect; Capacity Plus or Linked Capacity Plus system, wil...

New in R2.3: Digital Voting..

Wednesday, December 11, 2013

UPDATE Note that Satellite Receivers in a Single-/Multisite Capacity Plus system with firmware R02.30.12 (or later) do not require Capacity...

Multisite Capacity Plus Cheat Sheet (Updated)

Monday, August 26, 2013

Some time ago (26.08.2013), I created a Multisite Capacity Plus configuration cheat sheet, for the repeaters and routers. I've just (...

NAT Loopback no longer a requirement for Linked Capacity Plus.

Friday, March 08, 2013

As of firmware release R02.20.02, a router which support NAT loopback is no longer a requirement for Linked Capacity Plus. NAT is still requ...

MOTOTRBO IP Networking Requirements

Wednesday, December 12, 2012

MOTOTRBO utilises a proxy discovery mechanism to learn about the network. All Peers (Repeaters, RDAC, 3rd Party Applications) initially com...

Subscribe to: Posts ( Atom )

DJ0WH