REPOST: MOTOTRBO and IP 📖
Tuesday, December 05, 2023
In 2012, I wrote a post about IP networking in MOTOTRBO. This post got updated a few times and when I was looking at it the other day, I dec...
Showing posts with label Multisite Capacity Plus. Show all posts
Showing posts with label Multisite Capacity Plus. Show all posts
A split in half Capacity Plus site drops talkgroup calls after 3-5 seconds 😕
Tuesday, September 05, 2023
Our Customer uses a small LCP system consisting of three sites [...]. The biggest site has an issue of intermittently dropping local calls a...
The shortest answer to a question.
Tuesday, June 20, 2023
Q. I have a 25 repeater system spread across a large land mass, currently using IP site connect with Turbonet. Currently running with 7 ar...
A curious problem...
Tuesday, May 30, 2023
Q. I manage a MotoTrbo Capacity plus single site system with 4 channels and many users. Radios used are UHF XPR 6000, XPR 7000, XPR 4000, a...
Expanding a Linked Capacity Plus System
Tuesday, November 29, 2022
Question My company has a relatively small Linked Capacity Plus System with DR3000 repeaters. We are currently looking into growing the cap...
Three MSCP systems with All Call?
Tuesday, October 25, 2022
This question came in the other day via my Blog's contact form: I want to set up three capacity plus multi site systems in one area, bec...
Multisite Capacity Plus Channel Blocked Override
Tuesday, July 05, 2022
The new Channel Blocked Override feature in Multisite Capacity Plus is a useful feature that will improve wide-area talkgroup call setup in ...
Some things to think about if you have a MSCP system with an unequal number of repeaters at each site
Tuesday, November 02, 2021
A Multisite Capacity Plus system with an unequal number of channels on each site is a valid configuration. This would be the choice when the...
Multisite Capacity Plus without routers? 😲
Tuesday, October 26, 2021
Since its introduction in 2012, the recommendation has always been to make use of Routers in Multisite Capacity Plus systems. While this ad...
Ten mistakes technicians make when deploying a Multisite Capacity Plus system.
Tuesday, May 04, 2021
Although the below tips refer to Multisite Capacity Plus, many of them could apply to IP Site Connect too. At work, I'm not involved tha...
How to check if NAT is working?
Tuesday, February 02, 2021
A common hiccup on new (or expanding) Multisite Capacity Plus systems, is that the repeaters are not able to connect between sites. More oft...
Subscribe to:
Posts
(
Atom
)
Popular Posts
-
Pulling pin 17 to ground will activate PTT function, activating the auxillary microphone input. Receive Audio is a fixed level (in... -
UPDATE (28.05.19) The below is only applicable to CPS 16.0 and earlier. CPS2 has different error codes that are in form of 100XXXX w... -
Adding the PSK to a radio in CPS/RM This feature provides additional data security on the USB or IP link, between a radio or repeater an... -
To get your custom image imported into a R7, you will need to save it as follows: File Type: Bitmap (BMP) Dimensions: 240 x 320 pixels Colou... -
The Motorola SLR8000 is a high-performance 100W repeater designed to provide reliable two-way radio communication coverage for large-scale...
Quick Links
Blog Archive
Get posts by email
Stuff to take note of.
About me
My name is Wayne Holmes (Ham Callsign DJ0WH). To discover a bit about me and what I do, click here.
Translate
Powered by Blogger.