DJ0WH: IP Site Connect

Showing posts with label IP Site Connect. Show all posts

Can't OTAP on other sites?

Tuesday, April 28, 2026

Q. We have a working MOTOTRBO IP Site Connect with Multiple sites and are using OTAP successfully through the Master Site. We have been una...

Repost: MOTOTRBO Link

Monday, November 18, 2024

This post originally appeared on 3 July 2018. Around 18 November 2024, I made some small changes and added some (hopefully useful) informati...

Can I use Starlink?

Tuesday, August 13, 2024

[Q] I would like to set up a site connect system using three DR3000 repeaters, using Starlink as the backhaul/network link. These will be d...

Any tool or way to debug MotoTRBO repeaters?

Tuesday, July 30, 2024

[Q] Do you know, if there is any tool or way to debug MotoTRBO repeaters like DR3000 or SLR5500 working in IP Site Connect network, especia...

TT3705B now also supports MOTOTRBO IP Site Connect!

Tuesday, March 05, 2024

TT3705B is the self-service gateway that you can purchase and configure yourself via the WAVE Admin Portal. This gateway now also supports ...

REPOST: MOTOTRBO and IP 📖

Tuesday, December 05, 2023

In 2012, I wrote a post about IP networking in MOTOTRBO. This post got updated a few times and when I was looking at it the other day, I dec...

¿Esta opción se vuelve sombreada y ya no se pueden realizar cambios en la misma?

Tuesday, July 04, 2023

Q. I have been programming some Motorola SLR5100 repeaters in an IP Site Connect system, the issue is with the repeaters that are configur...

Master cannot see peer?

Tuesday, June 27, 2023

Q. I am currently setting up an IP site connect networking between a DR3000 as master and a SLR5500 as peer. The connection should work ove...

What could cause temporary degradation of voice quality?

Tuesday, June 13, 2023

Q. What could have caused the degradation of the voice on IP site Connect, so during the reception of the message, part of it is incomprehen...

Two master repeaters? 🥴

Tuesday, December 20, 2022

Question We have an IPSC system. We want to use a redundant setup. The main repeater IP is 100.100.100.1. The redundant repeater IP should a...

How to check if NAT is working?

Tuesday, February 02, 2021

A common hiccup on new (or expanding) Multisite Capacity Plus systems, is that the repeaters are not able to connect between sites. More oft...

I want to build a Multisite Capacity Plus system, which router and/or switch should I choose?

Tuesday, November 10, 2020

The short answer is any professional-grade hardware you can get your hands on. The longer answer is as long as the router is able to support...

The difference between Radio Kill and Radio Disable

Tuesday, July 28, 2020

Radio Kill is a Capacity Max only feature. A killed Capacity Max radio will stop functioning altogether and must be sent to a Motorola repa...

Many readers will get this wrong!

Tuesday, May 19, 2020

Imagine this, if you will. A UHF trunked radio site is located on a hilltop site. The transmitter power is set to 25W and receiver sensitivi...

Why and when a duplexer wont be sufficient?

Tuesday, July 09, 2019

The purpose of a regular (notch) compact duplexer, is to prevent the transmitted signal (RF energy) from entering the receiver and any re...

What is R56?

Tuesday, July 02, 2019

R56 is a widely accepted industry standard; that details the requirements and guidelines for the installation of communications infrastru...

New: Unaddressed; Broadcast and Open Voice Channel Mode Calls

Tuesday, June 11, 2019

As of R2.10.0, MOTOTRBO supports three new call types. Note that these call types are not supported in Capacity Plus and Capacity Max has...

List of known TCP and UDP ports used on MOTOTRBO

Tuesday, October 30, 2018

Here is a list of known TCP/UDP ports that you may come across in a Capacity Max system. Some ports are also used in other topologies lik...

Subscribe to: Posts ( Atom )

DJ0WH